Victron Energy integration
Victron Remote Monitoring for Your Whole Fleet
TrackSyte® works with Victron. See Victron battery, solar and system data in the same portal as your generators, fuel cells, security systems and plant — connected by VE.Direct, Bluetooth or a Cerbo GX on the network.
Through the TrackSyte® Portal, teams get remote monitoring of Victron battery and solar information — so they can review what is happening before travelling to site.
- ✓Approved Victron Energy Developer — Officially approved by Victron Energy.
- ✓Built for remote and off-grid assets — Designed for demanding environments.
- ✓Manage fleets, not just sites — One view of every Victron-powered asset.
The challenge
Remote power systems are deployed in locations where travel is costly, time is limited and uptime is critical.
Without trusted data, teams often send engineers to site to investigate issues that could have been diagnosed remotely.
Fixed schedules
Lead to unnecessary site visits.
Unclear battery health
Creates runtime uncertainty.
Faults are hard to diagnose remotely
Slowing down responses.
Every unnecessary visit increases
cost and pressure.
What TrackSyte® monitors from Victron systems
Battery health
Understand charge state, battery power and runtime risk before dispatching engineers. Seeing SOC and estimated runtime remotely helps operators decide whether a site visit is actually required.
- ✓State of charge
- ✓Battery voltage & current
- ✓Battery power
- ✓Estimated runtime
Solar & charging performance
Monitor solar production and charging so you know how your system is performing.
- ✓Solar power
- ✓Solar voltage & current
- ✓Energy yield
- ✓Charging performance
System performance
Keep track of loads, AC & DC power and system status in real time.
- ✓AC loads
- ✓DC system load
- ✓Inverter / charger status
- ✓Alarms & warnings
Asset location
See where your assets are and track mobile or temporary deployments.
- ✓GPS location
- ✓Geofences
- ✓Movement & positioning
- ✓Asset history
Three ways to connect Victron
VRM is Victron's free portal and works well for Victron systems on their own. TrackSyte® works with Victron to put those systems in the same view as the rest of your fleet.
VE.Direct
A cable from the Victron device to the Neo 2 gateway. Suits SmartShunt, BMV, MPPT solar chargers and other VE.Direct products.
Bluetooth
Neo 2 reads supported Victron Smart devices wirelessly, with no extra cabling inside the enclosure.
Cerbo GX on the network
Where a Cerbo GX is already fitted, TrackSyte reads it over the local network. The Cerbo GX keeps controlling the system.
Neo 2, GlobalLink 520 and Cerbo GX compared
For remote monitoring of Victron-powered assets. The Cerbo GX also controls the Victron system, and TrackSyte® works alongside it.
| TrackSyte® Neo 2 | Victron GlobalLink 520 | Victron Cerbo GX | |
|---|---|---|---|
| Power draw | As low as 0.013 W | 0.24–0.77 W average at 12 V | 2.8 W at 12 V (3.8–4.8 W with GX Touch) |
| Supply voltage | 9–30 V DC | 8–70 V DC | 8–70 V DC |
| Victron connection | VE.Direct, Bluetooth, or a Cerbo GX over the network | 2 × VE.Direct, Bluetooth | VE.Direct, VE.Bus, VE.Can and more |
| Non-Victron equipment | CAN bus / J1939, RS485 / Modbus, Ethernet, digital I/O | Not listed | Supported third-party devices |
| GPS location | Built in (GPS, Galileo, GLONASS, BeiDou) | Not listed | Optional USB GPS |
| Movement and tilt | 6-axis IMU | Not listed | Not listed |
| Mobile network | 4G LTE, LTE-M, NB-IoT | LTE-M | Optional GX LTE 4G modem |
| Backup battery | Built-in lithium | Not listed | Not listed |
| Portal | TrackSyte: Victron alongside every other asset | VRM (free, Victron systems) | VRM (free, Victron systems) |
Victron figures from Victron Energy's published GlobalLink 520 and Cerbo GX documentation, October 2026. "Not listed" means the feature is not listed in that documentation. Neo 2 runs from 9–30 V DC, so 48 V systems need a suitable supply. See the Neo 2 specification.
Victron system integration for mobile assets
TrackSyte® is built by Green Power Solutions, an approved Victron integrator and approved Victron Energy developer. The integration reads the Victron equipment already on each asset — battery state of charge, voltage, current and estimated runtime, plus solar and charging data — and shows it for the whole fleet, so you can see which sites are healthy, which are trending down and which need a visit.
Low-battery assets are summarised on the fleet overview, and alert rules warn your team early. For non-Victron batteries and a wider view of battery monitoring, see our remote battery monitoring system.
Solar monitoring and charging performance
Solar monitoring shows how much energy each array is producing and how well batteries are charging. Comparing solar yield with load helps you spot shaded or dirty panels, undersized systems and sites that are relying too heavily on backup power.
Energy and impact reports turn this into indicative generator use avoided, fuel and CO₂ savings for your customers.
See how battery and solar monitoring is used for CCTV tower monitoring, PID and perimeter systems and hybrid generators and temporary power, or pair Victron with EFOY fuel cell monitoring and our Neo 2 gateway. For practical advice, read our guides to off-grid battery monitoring and solar CCTV towers.
Why operators choose TrackSyte® for Victron
Fewer site visits
Know before you go.
Better uptime
Identify issues earlier and prevent downtime.
Faster diagnosis
Understand root causes remotely.
Lower operating cost
Reduce unnecessary callouts and travel.
Fleet visibility
Manage distributed assets at scale.
Built with Victron Energy
TrackSyte® is an approved member of the Victron Energy Software Integrator Program, enabling reliable integration with Victron-powered systems across remote, off-grid and mobile assets.
Victron monitoring FAQs
- What Victron battery data can I see remotely?
- Through the TrackSyte® Portal you can review Victron battery health signals such as state of charge, voltage and current, battery power and estimated runtime — helping teams assess risk before dispatching engineers.
- Can TrackSyte monitor Victron solar performance?
- Yes. TrackSyte® can show Victron solar and charging performance, including solar power, voltage and current, energy yield and charging behaviour alongside the wider system view.
- Can I get alerts when a battery is running low?
- Yes. You set global or device-specific alert rules with critical, warning and information levels, and the fleet overview summarises low-battery assets. Alerts can be sent by email, webhook or Slack.
- Which assets benefit most from remote battery monitoring?
- Anything running on batteries away from mains power — mobile CCTV towers, PID and perimeter systems, welfare units, hybrid generators and temporary power systems — where a flat battery means downtime and a call-out.
- Does TrackSyte replace Victron VRM?
- No. TrackSyte works with Victron. VRM is Victron's free portal and is excellent for Victron systems. TrackSyte brings those Victron systems into the same portal as the rest of your fleet — generators, EFOY fuel cells, Ajax security, pumps and plant — with fleet-wide alerts, GPS location and movement alerts.
- How does TrackSyte connect to Victron equipment?
- Three ways: the Neo 2 gateway connects to Victron devices by VE.Direct cable or over Bluetooth, and TrackSyte can also read a Cerbo GX over the local network. Use whichever suits the system already fitted to the asset.
- Can TrackSyte read a Victron Cerbo GX?
- Yes. TrackSyte can read a Cerbo GX over the network, so systems that already have one do not need rewiring. The Cerbo GX keeps controlling the Victron system; TrackSyte adds it to your fleet view.
- How does Neo 2 compare with the Victron GlobalLink 520 and Cerbo GX?
- Neo 2 draws as little as 0.013 W. Victron publishes 0.24–0.77 W average at 12 V for the GlobalLink 520 and 2.8 W at 12 V for the Cerbo GX. Neo 2 also has GPS, a 6-axis IMU for movement and tilt alerts, a lithium backup battery, 4G LTE, LTE-M and NB-IoT, and CAN bus, Modbus and Ethernet for non-Victron equipment. It runs from 9–30 V DC, so 48 V systems need a suitable supply.
- Does battery monitoring only work with Victron?
- Victron is our most common integration. Our Neo 2 gateway also works with supported smart and lithium battery management systems (BMS) and the Victron Smart Shunt, so mixed power setups can sit in the same portal.
Ready to monitor your Victron-powered assets with confidence?
See how TrackSyte® helps you eliminate unnecessary site visits. See the TrackSyte Portal.